GTA 6 HDR settings for a picture that looks too dark or flat
Open GTA VI’s pause menu, then Settings, Display and HDR Calibration. Adjust the game’s own controls. In HDTVTest’s launch tests on PS5 and Xbox Series X, the picture followed the three in-game sliders even when the console’s HDR calibration was changed.
On this page
If the TV is rated for 1,000 nits or more
HDTVTest’s Vincent Teoh measured the game on reference monitors. For a display capable of at least 1,000 nits, he suggests starting at 2,000 for Max Brightness and 35 for Paper White. Start Black Levels at zero, hide the interface and raise it until the checkerboard just becomes visible. The right black-level number depends on your panel and room.
Check the picture away from the calibration logo
Take a picture of your original slider settings first. Compare a bright exterior, a shadowed interior and the game interface with the room lit as you usually play. If shadows have lost texture, adjust Black Levels in small steps. If the interface is uncomfortably bright, revisit Paper White. Check the bright scene again after adjusting the other sliders.
On Teoh’s setup, Max Brightness at 1,000 with Paper White below 50 produced about 600 nits on the in-game sun. That mismatch explains why following the sample logo can leave a high-brightness screen looking dim. The 2,000 starting value above applies to the brighter display class he tested.
Vincent Teoh shows the test square, followed by a scene from the game with the brightness settings and waveform on screen.
If the console is sending an SDR signal
On PS5, open Settings, Screen and Video, Video Output, then HDR. On When Supported allows compatible content to use HDR. On Xbox, open Settings, General, TV & display options, then 4K TV details to see which formats the console detects. The Xbox Store lists HDR10 for GTA VI. Review the selected HDMI input and its supported modes if the console cannot detect HDR.